Pages

Monday, November 21, 2011

DIY STAR TREE TOPPER Explained


Okay, so a lot of you have been requesting instructions on the Star Tree Topper. So this evening I sat down, and not only took lots of pictures of the process but also created new ready to print templates for you guys. 

So here you go.




  Materials you will need: 

- Cardstock Paper
- Hot glue gun
- Scissors 
- Color Printer
- Glitter Spray (Optional)

Instructions: 

Step 1 - Start by downloading the templates for the tips of your star. You can download the blank template if you want to add your own pattern on them using Photoshop or if you want to print in a decorative cardstock paper, or you can download the ready to print templates with patterns on them if you have a color printer.



Step 2 - Print your templates on cardstock paper. You will need 5 of them for the tips of the star. 



Step 3 - Cut and fold the templates. You will cut them on the straight lines and fold on the dotted lines. 






Step 4 - Glue the sides of the tips creating a cone shape. 





You will end up with 5 cones like these. 



Step 5 - This is the most tricky part. At the bottom of your cones, you will see the folded edges which you will need to attach to the edges of the other tip with the hot glue. You will glue the bottom right side of a tip to the bottom left side of the other. You will end up with something like this: 




Do the same with all of them until you have all 5 tips glued together. You can leave a hole at the bottom where you will attach to the tree, by not glueing the sides together (like the one in the picture below). But if you want a closed star, just press the middle down to flatten the star a bit, so that the bottom sides meet and you can glue them to each other. 




And that is it!! You are done making your star!

I added some Glitter Spray to mine to make it shiny. You can also poke holes in them and add lights inside. 



I hope this was helpful. If you make one, I would love to see pictures! 

xoxo


18 comments:

  1. Beautiful and so helpful! Thank you so much for the template!!!

    ReplyDelete
  2. No problem!! Thanks for checking it out :)

    ReplyDelete
  3. Thank you so much for the template and tutorial! Yours looks awesome and think it would look great on my tree :)

    ReplyDelete
  4. If you make one make sure to post a picture so we can see it :)

    ReplyDelete
  5. Perfect. Thanks for the tutorial and template. Very helpful!

    ReplyDelete
  6. Awesome! Thank you so much for the templates and the how-to! Love it!

    ReplyDelete
  7. I'm glad you love it! I'd love to see some pictures if you make one :)

    ReplyDelete
  8. my four year old son will be thrilled. he is adamant about having a star on our tree. so. looks like I will be making this :) thanks for the tutorial!

    ReplyDelete
  9. Yay!! I hope he likes the results! :)

    ReplyDelete
  10. I'm almost finished making one of these! So great! One question - how do you affix it to the tree? Do you glue a ribbon on the back and tie it on? Any advice? Thanks!

    ReplyDelete
  11. Hey Heather, I actually used a safety pin through the back of the star and pinned to the top of the tree, but you could use a ribbon as well and tie it. I'd make two holes on the back and pass the ribbon through rather than using glue, just to make sure it doesn't fall :)

    ReplyDelete
  12. thanks for the fabulous template! i made one for our tree this year, mod podged with book pages & a little tinsel. love it!
    http://leafandletterhandmade.blogspot.com/2011/12/no-budget-christmas-decor-star-tree.html

    ReplyDelete
  13. This template is great. I searched all over for just the right tree topper and couldn't find one I liked. Your directions were great, and I love how my star turned out!

    ReplyDelete
  14. I used your template and directions last year for my tree topper. I love it! I've started a blog since then, and would love to share and link back to you.
    Roxana http://fourelevenrox.blogspot.com/

    ReplyDelete
  15. Ah !! Fantastic!! easy to make and it looks so beautiful!!

    ReplyDelete
  16. How big do you print the template? How big are these stars?

    ReplyDelete
    Replies
    1. It's up to you how big you want the star to be. I personally printed the templates on a 8x10 paper and turned to be just the right size for my 6ft tree.

      Delete

Thank you for leaving a comment! Can't wait to read it! :)